HUD can auto adapt to vehicle type which in line with OBDII or EUOBD (On-Board Diagnostic System)
HUD can display many parameters at the same time as follows, vehicle speed, engine speed,water tempe- rature (voltage, throttle valve position, ignition advance angle, time of 100 km acceleration), fuel consumption, mileage, low fuel tips, engine failure
Driver can chose normal display mode, high- speed display mode and automatic display mode
KM and mile can be switched freely to meet the need of inch auto meter
The display area is 5.5 inches which is very clear for driver to read data
Starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle's battery. Moreover, we pre-serve the hand switch function to controlthe HUD
HUD can offer single-stage and four-stage overspeed alarm modes to choose to make driving safer
Notice 1: Open the engine hood and find the paster below it (see the picture below), if it has words like OBD II CERTIFIED, then it can be installed. You should affixed the paster in the HUD display area, it can refrain strong light, brings better display effects when HUD working.
Notice 2: Know the type of your vehicle. When purchasing HUD, you need to choose the type of vehicle that meets the OBD II standards for normal use. Any US Vehicle 2004 or later will have an OBD2 port to use with the display. Outside the United States vehicle after 2008 will have an OBD2 port to use with the display.